Geodesic Solutions Community Wiki

User Tools

Site Tools

You are here: Auction and Classified Software Support Home » Admin Menu » Site Setup » General Settings
admin_menu:site_setup:general_settings:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
admin_menu:site_setup:general_settings:start [2012/10/04 21:44]
jonyo [Use 404 Status Code] 		admin_menu:site_setup:general_settings:start [2014/09/25 16:55] (current)
Line 6: Line 6:
 This menu controls the various general "site-wide" switches, and settings. This menu controls the various general "site-wide" switches, and settings.
  
-===== URL Settings =====+====== URL Settings ======
  
 These settings are used by the software when generating links, so it is important that they are set correctly.  Most of these will be auto-set during the installation process, but you may need to make adjustments to them if you change where the software is installed. These settings are used by the software when generating links, so it is important that they are set correctly.  Most of these will be auto-set during the installation process, but you may need to make adjustments to them if you change where the software is installed.
Line 12: Line 12:
 <tip c w>Be sure that these settings are set correctly, as many internal links within the software and links that appear in any generated emails are built off of these URL settings.</tip> <tip c w>Be sure that these settings are set correctly, as many internal links within the software and links that appear in any generated emails are built off of these URL settings.</tip>
  
-==== Site URL ====+===== Site URL =====
  
 You must set the complete URL for the top file of your listing site here. In other words, what is the URL to your listings site?  This includes the complete URL including the software's "index.php" file.  If your site was installed on the domain name "example.com" and you installed it to the main directory of the site, the URL you would enter would be:  **http://www.example.com/index.php** You must set the complete URL for the top file of your listing site here. In other words, what is the URL to your listings site?  This includes the complete URL including the software's "index.php" file.  If your site was installed on the domain name "example.com" and you installed it to the main directory of the site, the URL you would enter would be:  **http://www.example.com/index.php**
Line 18: Line 18:
 This URL should also the **directory** you have installed the software into, if applicable. For example, if you installed the software into a directory named "listings", the **Site URL** field should look similar to this: **http://www.example.com/listings/index.php** This URL should also the **directory** you have installed the software into, if applicable. For example, if you installed the software into a directory named "listings", the **Site URL** field should look similar to this: **http://www.example.com/listings/index.php**
  
-==== Base File Name ====+===== Base File Name =====
  
 The "top" file name within this Geo Software can be changed to any name you prefer. This gives you the flexibility to leave the file as **index.php** or change it to another file name. Depending on your server's configuration, the index.php will be opened automatically when no specific filename is entered in the address.  For instance, if someone visits www.example.com without specifying the file name, it will automatically load index.php to display.  For this reason, we recommend leaving the file name as index.php, but you can still re-name it and change this setting to match in your admin. The "top" file name within this Geo Software can be changed to any name you prefer. This gives you the flexibility to leave the file as **index.php** or change it to another file name. Depending on your server's configuration, the index.php will be opened automatically when no specific filename is entered in the address.  For instance, if someone visits www.example.com without specifying the file name, it will automatically load index.php to display.  For this reason, we recommend leaving the file name as index.php, but you can still re-name it and change this setting to match in your admin.
Line 32: Line 32:
 </tip> </tip>
  
-==== Secure SSL Site URL ====+===== Secure SSL Site URL =====
  
 This setting is the complete SSL link to access your site for secure connections.  This will be the complete **https://www.example.com/index.php**.  We recommend that you have your own ssl server certificate attached to your own domain (attached to your domain name...not any other domain)  if you are going to have an ssl connection to list items.   This setting is the complete SSL link to access your site for secure connections.  This will be the complete **https://www.example.com/index.php**.  We recommend that you have your own ssl server certificate attached to your own domain (attached to your domain name...not any other domain)  if you are going to have an ssl connection to list items.  
Line 40: Line 40:
 This setting is similar to [[admin_menu:site_setup:start#Site URL]], in most cases it will be the same, except with http**s** instead of http at the beginning. This setting is similar to [[admin_menu:site_setup:start#Site URL]], in most cases it will be the same, except with http**s** instead of http at the beginning.
  
-=== Server-Wide SSL Certificate ===+==== Server-Wide SSL Certificate ====
  
 A lot of hosting companies offer the use of a //server// wide SSL certificate((As opposed to a //domain// specific SSL certificate)), sometimes known as a shared SSL certificate.  They do this because it only requires one SSL certificate that is shared between many different domain names, so they are able to offer a SSL solution included with inexpensive shared hosting accounts.  In other words, if the "domain name" is different on your SSL URL than it is on your normal URL, most likely use a server wide SSL certificate. A lot of hosting companies offer the use of a //server// wide SSL certificate((As opposed to a //domain// specific SSL certificate)), sometimes known as a shared SSL certificate.  They do this because it only requires one SSL certificate that is shared between many different domain names, so they are able to offer a SSL solution included with inexpensive shared hosting accounts.  In other words, if the "domain name" is different on your SSL URL than it is on your normal URL, most likely use a server wide SSL certificate.
Line 46: Line 46:
 In most cases, a //server//-wide SSL certificate((As opposed to a //domain// specific SSL certificate)) will not work with the Geo installation.  We recommend obtaining a SSL certificate that is specific to your domain name if you wish to use SSL on your Geo installation. In most cases, a //server//-wide SSL certificate((As opposed to a //domain// specific SSL certificate)) will not work with the Geo installation.  We recommend obtaining a SSL certificate that is specific to your domain name if you wish to use SSL on your Geo installation.
  
-== To tell if you have a domain specific SSL certificate: ==+=== To tell if you have a domain specific SSL certificate: ===
   - Visit your website in a browser. <   - Visit your website in a browser. <
   - In the URL address bar, change the **http://** to **https://** and hit the enter key or click Go. <   - In the URL address bar, change the **http://** to **https://** and hit the enter key or click Go. <
   - Does the page display without any security errors?  If it does, you have a domain specific SSL certificate, which will work fine for using SSL with your Geo installation.  If it gives you an error like "Failed to Connect" (Firefox) or "Internet Explorer cannot display the webpage" (Internet Explorer), then a domain specific SSL certificate has not been installed for your site. <   - Does the page display without any security errors?  If it does, you have a domain specific SSL certificate, which will work fine for using SSL with your Geo installation.  If it gives you an error like "Failed to Connect" (Firefox) or "Internet Explorer cannot display the webpage" (Internet Explorer), then a domain specific SSL certificate has not been installed for your site. <
  
-==== Use SSL For ====+===== Use SSL For =====
  
 {{ :admin_menu:site_setup:general_settings:use_ssl.png |Use SSL For}} {{ :admin_menu:site_setup:general_settings:use_ssl.png |Use SSL For}}
Line 65: Line 65:
 </tip> </tip>
  
-=== 'Listing' Process ===+==== 'Listing' Process ====
  
 This will make the entire listing process use SSL connection.  Any page that has //a=cart// in the URL is considered to be in the listing process, such as the link below: This will make the entire listing process use SSL connection.  Any page that has //a=cart// in the URL is considered to be in the listing process, such as the link below:
Line 75: Line 75:
 If you are using the Authorize.net payment gateway, or any payment gateway that collects CC information directly from your site, we strongly recommend that you check the box as long as you have an SSL certificate.  If you do not collect CC information, using SSL is not as //important// so it is not as big a deal if you do not have a security certificate for your site, but it can still help your clients to feel more "secure" if they are placing a listing and it says that the site is "secure" while placing the listing. If you are using the Authorize.net payment gateway, or any payment gateway that collects CC information directly from your site, we strongly recommend that you check the box as long as you have an SSL certificate.  If you do not collect CC information, using SSL is not as //important// so it is not as big a deal if you do not have a security certificate for your site, but it can still help your clients to feel more "secure" if they are placing a listing and it says that the site is "secure" while placing the listing.
  
-=== User Login ===+==== User Login ====
  
 This feature **Added in 4.1.0** This feature **Added in 4.1.0**
Line 87: Line 87:
 As with any [[#Use SSL For]] setting, the [[#Secure SSL Site URL]] setting must be set correctly, and you must have an SSL certificate set up for your site, before turning this on.  Turning this on when either of those criteria are not met can cause errors. As with any [[#Use SSL For]] setting, the [[#Secure SSL Site URL]] setting must be set correctly, and you must have an SSL certificate set up for your site, before turning this on.  Turning this on when either of those criteria are not met can cause errors.
  
-=== User Management Pages ===+==== User Management Pages ====
  
 This feature **Added in 4.1.0** This feature **Added in 4.1.0**
Line 97: Line 97:
 As with any [[#Use SSL For]] setting, the [[#Secure SSL Site URL]] setting must be set correctly, and you must have an SSL certificate set up for your site, before turning this on.  Turning this on when either of those criteria are not met can cause errors. As with any [[#Use SSL For]] setting, the [[#Secure SSL Site URL]] setting must be set correctly, and you must have an SSL certificate set up for your site, before turning this on.  Turning this on when either of those criteria are not met can cause errors.
  
-=== Removing the unsecured objects browser warning ===+==== Removing the unsecured objects browser warning ====
  
 **Using <base> Tag:**  If you use the <base> tag within your templates, and also use the SEO addon, we recommend to remove the <base> tag as the SEO Addon automatically adds that for you((As of SEO addon version 2.0.0 released a few years ago.)), but only if there is not already a <base> tag present in your templates.  The <base> tag added by the SEO addon will automatically use the correct HTTP VS. HTTPS depending on if the current page is using a secure connection or not.  If you have added a <base> tag for other reasons, and do not use or wish to use the SEO addon:  You may need to create a specific page template for use on the pages that are SSL when set to be.  Within your new page template make sure to access the HTTPS URL instead of the HTTP URL to your site in the <base> tag.  If you don't create this "HTTPS" specific page template all of the elements and links within the page will reference the HTTP site when you want them to reference the HTTPS.  This will cause the browser to display the "unsecured objects" message if the URL in the browser address window is HTTPS yet all of the elements within the page are referenced using HTTP. **Using <base> Tag:**  If you use the <base> tag within your templates, and also use the SEO addon, we recommend to remove the <base> tag as the SEO Addon automatically adds that for you((As of SEO addon version 2.0.0 released a few years ago.)), but only if there is not already a <base> tag present in your templates.  The <base> tag added by the SEO addon will automatically use the correct HTTP VS. HTTPS depending on if the current page is using a secure connection or not.  If you have added a <base> tag for other reasons, and do not use or wish to use the SEO addon:  You may need to create a specific page template for use on the pages that are SSL when set to be.  Within your new page template make sure to access the HTTPS URL instead of the HTTP URL to your site in the <base> tag.  If you don't create this "HTTPS" specific page template all of the elements and links within the page will reference the HTTP site when you want them to reference the HTTPS.  This will cause the browser to display the "unsecured objects" message if the URL in the browser address window is HTTPS yet all of the elements within the page are referenced using HTTP.
Line 105: Line 105:
 To **find all non-secured elements of a page**, view the HTML source code of that page within your browser.  Now search that source for any absolutely referenced "HTTP" elements by searching for "http:" within that page.  If you find one or more non-secure elements you will need to correct these by changing the "http:" to "https:" within their URL's for elements referenced from elsewhere on the Internet or change those URL's to reference their elements relatively if they are on your same domain. To **find all non-secured elements of a page**, view the HTML source code of that page within your browser.  Now search that source for any absolutely referenced "HTTP" elements by searching for "http:" within that page.  If you find one or more non-secure elements you will need to correct these by changing the "http:" to "https:" within their URL's for elements referenced from elsewhere on the Internet or change those URL's to reference their elements relatively if they are on your same domain.
  
-==== Force SSL URL ====+===== Force SSL URL =====
  
 This setting will only have an effect if one of the [[#Use SSL For]] settings above is turned on, or on [[admin_menu/registration_setup/general_settings/start]] the [[admin_menu/registration_setup/general_settings/start#Use SSL for Registration]] setting is set to "yes"((Or, if you have an addon that adds its own pages that need to use SSL connection, but this is not typical.)). This setting will only have an effect if one of the [[#Use SSL For]] settings above is turned on, or on [[admin_menu/registration_setup/general_settings/start]] the [[admin_menu/registration_setup/general_settings/start#Use SSL for Registration]] setting is set to "yes"((Or, if you have an addon that adds its own pages that need to use SSL connection, but this is not typical.)).
Line 115: Line 115:
 Or if user visits the home page at **https**:<nowiki>//</nowiki>example.com/index.php which should NOT be viewed in SSL mode: It will "redirect" them to **http**:<nowiki>//</nowiki>example.com/index.php. Or if user visits the home page at **https**:<nowiki>//</nowiki>example.com/index.php which should NOT be viewed in SSL mode: It will "redirect" them to **http**:<nowiki>//</nowiki>example.com/index.php.
  
-===Server Compatibility Warning===+====Server Compatibility Warning====
  
 The [[#Force SSL URLs]] feature relies on 3 things to work: The [[#Force SSL URLs]] feature relies on 3 things to work:
Line 135: Line 135:
  
  
-==== Site On/Off Switch ====+===== Site On/Off Switch =====
  
 This switch allows you to temporarily take down your site (front user side) for routine maintenance, such as setting up Price Plans, or updating the software, etc. In affect, what you are doing is simply blocking access to the software's pages. This switch allows you to temporarily take down your site (front user side) for routine maintenance, such as setting up Price Plans, or updating the software, etc. In affect, what you are doing is simply blocking access to the software's pages.
Line 143: Line 143:
 When the site is turned off, you can still access your site in one of two ways: When the site is turned off, you can still access your site in one of two ways:
  
-=== Login as the Admin ===+==== Login as the Admin ====
  
 While this setting is still set to "on", login to the front side using the same username and password that you ordinarily login to the Admin Panel with. Then, change this setting to "off". You will still be able to browse the front side as the admin, but users will not be able to access the site. Instead, they will see the html file specified in the next setting below. While this setting is still set to "on", login to the front side using the same username and password that you ordinarily login to the Admin Panel with. Then, change this setting to "off". You will still be able to browse the front side as the admin, but users will not be able to access the site. Instead, they will see the html file specified in the next setting below.
  
-=== Specify Allowed IP's ===+==== Specify Allowed IP's ====
  
 You can specify in the admin panel that only certain IP's may access your site. This setting is under the following menu: You can specify in the admin panel that only certain IP's may access your site. This setting is under the following menu:
Line 153: Line 153:
 [[admin_menu:admin_tools_settings:security_settings:general_security_settings:start#Allowed IPs When Site Disabled|Admin Tools & Settings > Security Settings > General Security Settings]] [[admin_menu:admin_tools_settings:security_settings:general_security_settings:start#Allowed IPs When Site Disabled|Admin Tools & Settings > Security Settings > General Security Settings]]
  
-==== Site On/Off URL ====+===== Site On/Off URL =====
  
 If using the [[admin_menu:site_setup:start#site on/off switch]], you will need to specify the URL to a static html page that will display while your site is down for maintenance. With your software distribution you received an html file named "site_off.htm". It is located at the root of your software distribution and unless you change the file name to something else, the "site_off.htm" file will display when your "site on/off switch" is in the "off" mode. If using the [[admin_menu:site_setup:start#site on/off switch]], you will need to specify the URL to a static html page that will display while your site is down for maintenance. With your software distribution you received an html file named "site_off.htm". It is located at the root of your software distribution and unless you change the file name to something else, the "site_off.htm" file will display when your "site on/off switch" is in the "off" mode.
  
-==== Use 404 Status Code ====+===== Use 404 Status Code =====
  
 If this is turned on (box is checked):  When someone visits a listing that has expired (or an invalid listing ID), the "page status" is set to "404".  It also does this if visiting an "old" category that no longer exists (or using an invalid category ID).  This is recommended to turn on, so that search engines will know to stop "indexing" a listing after it has expired. If this is turned on (box is checked):  When someone visits a listing that has expired (or an invalid listing ID), the "page status" is set to "404".  It also does this if visiting an "old" category that no longer exists (or using an invalid category ID).  This is recommended to turn on, so that search engines will know to stop "indexing" a listing after it has expired.
  
-==== Add noindex,nofollow to sorted pages ====+===== Add noindex,nofollow to sorted pages =====
  
 If this setting is turned on, when the page has "sorting" applied it automatically adds a meta tag that indicates to search engines to not index this page and not follow links on this page.  This way search engines do not "follow" links to sort the browsing listings by a certain column.  The result is that search engines will only index "main" browsing pages, and not attempt to index hundreds of different sorting options for each browsing page, which can result in a lot of extra "duplicate content" pages getting indexed. If this setting is turned on, when the page has "sorting" applied it automatically adds a meta tag that indicates to search engines to not index this page and not follow links on this page.  This way search engines do not "follow" links to sort the browsing listings by a certain column.  The result is that search engines will only index "main" browsing pages, and not attempt to index hundreds of different sorting options for each browsing page, which can result in a lot of extra "duplicate content" pages getting indexed.
-===== Miscellaneous Site Settings =====+====== Miscellaneous Site Settings ======
  
 These are misc. settings that are of the site-wide nature. These are misc. settings that are of the site-wide nature.
  
-==== Listing Types Allowed ====+===== Listing Types Allowed =====
  
 This is a site wide setting which allows your visitors to place only classifieds, only auctions, or both within all categories of the site. Some sites may have additional listing types in this list. This is a site wide setting which allows your visitors to place only classifieds, only auctions, or both within all categories of the site. Some sites may have additional listing types in this list.
Line 179: Line 179:
 </tip> </tip>
  
-==== Company Address ====+===== Company Address =====
  
 This is the company's address information (where payments should be sent, contact info, etc). This is the company's address information (where payments should be sent, contact info, etc).
Line 193: Line 193:
  
  
-==== Server Time Offset ====+===== Server Time Offset =====
  
 If your hosting server is in a different time zone than where your site is located, you may want to adjust this setting relative to your server's time clock. For example, if you are located in the UK, but your hosting server is located in the United States, you may want to adjust this setting accordingly so that the software knows the system default time to display. If your hosting server is in a different time zone than where your site is located, you may want to adjust this setting relative to your server's time clock. For example, if you are located in the UK, but your hosting server is located in the United States, you may want to adjust this setting accordingly so that the software knows the system default time to display.
  
-==== Levels of categories in Dropdown (client side) ====+===== Levels of categories in Dropdown (client side) =====
  
 Set this to the number of levels of categories and subcategories you wish to display in these category dropdowns.  If you set this to "2" the main categories and the first level of subcategories to these main categories will be displayed.  Set this to the number of levels of categories and subcategories you wish to display in these category dropdowns.  If you set this to "2" the main categories and the first level of subcategories to these main categories will be displayed. 
Line 203: Line 203:
 If you do not have a large number of total categories within your site it would be best to leave this setting to 0 (less than 30).  This setting affects all places where a dropdown to choose a category is used. Some sites have several categories based on states of the US.  It doesn’t take too many categories with all 50 states under each to run into hundreds of categories quickly.  A dropdown containing possibly thousands of entries can be cumbersome and take a long time for the page to "draw" within the browser, and may even cause errors due to taking so many server resources.  Therefore, we created this setting to account for this possibility. If you do not have a large number of total categories within your site it would be best to leave this setting to 0 (less than 30).  This setting affects all places where a dropdown to choose a category is used. Some sites have several categories based on states of the US.  It doesn’t take too many categories with all 50 states under each to run into hundreds of categories quickly.  A dropdown containing possibly thousands of entries can be cumbersome and take a long time for the page to "draw" within the browser, and may even cause errors due to taking so many server resources.  Therefore, we created this setting to account for this possibility.
  
-==== Levels of categories in Dropdown (admin) ====+===== Levels of categories in Dropdown (admin) =====
  
 This setting is similar to the one above, except it applies only to the admin panel. It is intended to help you more easily browse your admin panel if you have a lot of categories in the system. This setting is similar to the one above, except it applies only to the admin panel. It is intended to help you more easily browse your admin panel if you have a lot of categories in the system.
  
-==== Use built-in CSS ====+===== Use built-in CSS =====
  
 Choose whether to use site wide built in css or use your own. This will most likely be set to **yes** unless you use your own CSS files. Choose whether to use site wide built in css or use your own. This will most likely be set to **yes** unless you use your own CSS files.
  
-===== IDevAffiliate Integration =====+====== IDevAffiliate Integration ======
 These settings are only used if you plan on integrating [[http://www.idevdirect.com/|IDevAffiliate]] with your Geo installation. These settings are only used if you plan on integrating [[http://www.idevdirect.com/|IDevAffiliate]] with your Geo installation.
  
 These settings enable you to turn on the integration between the Geo software, and IDevAffiliate's software, which allows you to pay affiliate commissions to your affiliate sites that have sent visitors to you who in turn listed items on your site. Please contact [[http://www.idevdirect.com/|IDevAffiliate]] for information regarding the installation and features of their software. These settings enable you to turn on the integration between the Geo software, and IDevAffiliate's software, which allows you to pay affiliate commissions to your affiliate sites that have sent visitors to you who in turn listed items on your site. Please contact [[http://www.idevdirect.com/|IDevAffiliate]] for information regarding the installation and features of their software.
  
-==== Activated ====+===== Activated =====
  
 Checking this will allow you to turn on the IDevAffiliate integration with our software.  To fully activate the integration, you must also correctly specify the [[admin_menu:site_setup:start#Absolute Path to IDevAffiliate sale.php]] setting. Checking this will allow you to turn on the IDevAffiliate integration with our software.  To fully activate the integration, you must also correctly specify the [[admin_menu:site_setup:start#Absolute Path to IDevAffiliate sale.php]] setting.
  
-==== Absolute Path to IDevAffiliate sale.php ====+===== Absolute Path to IDevAffiliate sale.php =====
  
 Note that this setting is hidden unless you have checked the [[admin_menu:site_setup:start#activated]] setting.  This will be the absolute path to the directory that your **sale.php** file that is part of the IDevAffiliate software.  It should be the directory only (does not include sale.php at the end), and it should include the trailing slash. Note that this setting is hidden unless you have checked the [[admin_menu:site_setup:start#activated]] setting.  This will be the absolute path to the directory that your **sale.php** file that is part of the IDevAffiliate software.  It should be the directory only (does not include sale.php at the end), and it should include the trailing slash.
Line 230: Line 230:
 ===== Character Encoding ===== ===== Character Encoding =====
  
-==== Character Set (CHARSET) Currently Used in Admin ====+===== Character Set (CHARSET) Currently Used in Admin =====
  
 Choose the character set based upon the current Language you are editing text for. Changing the setting here, will affect only the text entries that you make within the Admin Panel. You will be able to enter special encoded characters in this admin depending upon which character setting you choose. Choose the character set based upon the current Language you are editing text for. Changing the setting here, will affect only the text entries that you make within the Admin Panel. You will be able to enter special encoded characters in this admin depending upon which character setting you choose.
  
 <tip c n>**NOTE**: This setting only affects the **admin area**, to change the charset used on the //front side// you need to do so by changing the charset in the templates.</tip> <tip c n>**NOTE**: This setting only affects the **admin area**, to change the charset used on the //front side// you need to do so by changing the charset in the templates.</tip>
admin_menu/site_setup/general_settings/start.1349387044.txt.gz · Last modified: 2014/09/25 16:55 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki